In case you were wondering, there is more than one way to “buff” or “shiny” your golf clubs. The various methods range from hand buffing and wire brushing to spraying and abrasive blasting. Each one has its perks but also comes with its downsides. That said, which method you should use depends on how you want the look of your club—shiny, matte, or traditional. Let’s take a look at each one.
Table of Contents
Traditional
Traditional cleaning is ideal if you want your club to look like new. You can use any cleaning product you want and apply it all over your club using a brush or rag. The advantage to this method is that you can ensure your club is free of any dust or debris. It also allows you to polish the metal to achieve that sleek, shiny look.
One big downside to this method is that it takes a lot of time. You have to go from club to club, applying the product and making sure each one is cleaned properly. Also, depending on the condition of your club, this method may not work at all. You could end up causing more damage if you don’t know what you’re doing. That’s why this method is best used as a preventative measure before you play or practice with the club.
Matte
If you’re looking for a quick and easy way to clean your club without having to worry about applying the product in a way that ensures you don’t cause too much damage, then the matte finish is the way to go. Simply apply some wax with a cloth or brush to the surface of your club and let it sit for 10 minutes or so before wiping away any excess wax with a cloth. The advantage of this method is that it maintains the original look of the metal while also making it easier to keep clean.
The downside to this method is that it’s not as effective as traditional cleaning. You’ll need to reapply the wax every couple of weeks to keep that matte finish. Additionally, if you strip off too much of the wax buildup, the shine will come right back. So, you have to be careful not to overuse this method or you’ll end up with a dull club that doesn’t look as good as new.
Shiny
Shiny cleaning is all the rage these days. It’s what new clubs are being made of nowadays because it gives the look of an expensive stainless steel club for a fraction of the cost. The best way to achieve this look is with a wire brush and some oil. Simply apply some oil with a cloth or brush to the surface of your club and then brush away any excess. You can use any oil you want for this process, but light olive oil is what most people use because it’s cheap and effective. The disadvantage to this method is that it’s really easy to overdo it. If you keep brushing and oiling your club, it will start looking like polished steel. So, you have to be careful not to overuse this method or you’ll end up harming the surface of your club.
As you can see, there is more than one way to clean your golf club. It depends on what look you want for your respective brand. If you want a traditional look, then you should use traditional methods. If you want a matte finish, then go with that method. And finally, if you want a shiny look like what new clubs are being made of these days, then use the shiny method. Always be careful not to overuse any of these products or else you’ll end up causing more harm than good to your club.
Hopefully, this article helps clear up any confusion you might have regarding how to clean your golf club and which method is best suited for the job. The key takeaway lesson from this information is that it’s always best to be safe than sorry when it comes to cleaning your golf club.