When shopping for a luxury item, such as a car, it’s important to be mindful of the costs involved in maintaining its quality and style. A common scenario involves the purchase of a high-end vehicle only to discover that the tires and/or rims are defective. The solution in this case is to simply change the tires and rims; however, if you discover that the rear shocks are worn out, you’ll need to take the time to disassemble the whole thing and replace those as well.
Luckily, it’s not difficult to change the rear shocks on a golf cart. In fact, you’ll find instructions and a helpful diagram located below. Before you begin, make sure you’ve removed the front wheels so that you have full access to the back where the engine and transmission are located. Once you’ve cleared the engine and transmission out of the way, you can pull off the rear shocks and replace them with new ones. Changing the rear shocks on a golf cart is similar to changing the front tires and/or rims on a car, but it requires a bit more work since there are more parts to go through and it isn’t as easy to access the backside of the vehicle. For this reason, it’s important to take your time and do it right the first time around. Follow the steps below to change the rear shocks on a club car golf cart. (The information contained in this article was obtained from PureGym, an instructor-founded company specialising in sports science and technology. They make exercising easy and fun by providing high-quality gym equipment and first-class customer care. Head to their website to find a gym that suits your needs.
Table of Contents
Find The Right Tools
In order to change the rear shocks on a golf cart, you’ll need a set of basic automotive tools as well as a few speciality items. The former include wrenches, a socket set, and a hand drill. The latter include a shock tunnel plug, a hex key, a ratchet, and a socket. It’s important to note that some of these items may not be available at your local shop if you’re buying them individually.
The Right Place To Change The Rears
As mentioned above, it’s important to disassemble the rear of the vehicle before you begin work on it. One of the first steps in changing the rear shocks on a golf cart is to pull off the backrests and remove the carpet. After that, you can access the battery and transfer it to the trunk where it’ll be easier to carry in the event of an accident or damage to the vehicle. Once the battery is out of the way, you can pull off the two brackets holding the exhaust pipe to clean it up a bit before you proceed with changing the rear shocks.
Remove The Exhaust Pipe And Brackets
Even though the rear of the golf cart is accessible without any special tools, it’s still not an easy task to remove the exhaust pipe and the two brackets holding it in place. The first step in changing the rear shocks on a golf cart is to remove the pipe and the two brackets holding it in place. After that, you can replace the entire unit with a new one.
Change The Brakes
Another thing you may want to consider changing on a golf cart is the brakes. It is a good idea to first check the brake fluid level in the reservoir before you change it. If it’s low, you’ll need to top it up. Another important point to make is that the calipers in your vehicle may be worn out or outdated and need to be replaced. Worn out or outdated calipers can seriously affect your braking performance. It’s a good idea to replace them before you begin racing down the road. You should also make sure that the brake pads in your vehicle are the right size and depth for the type of terrain you will be dealing with. For example, if you have a lot of gravel on the road, you’ll need thicker pads than if you were driving on a smooth road. Thicker pads will provide better stopping power.
Measure The Distance Between The Axles
Now that the front and back of the vehicle are separated, it’s a good idea to measure the distance between the axles. This will help you determine how much space you have between the vehicle’s chassis. Once you have that information, it’s easy to set a reasonable expectation for how much weight you can carry. In most cases, the farther the distance between the axles, the more space you will have for cargo. As mentioned above, the weight capacity of a golf cart is fairly high, typically around 1700-1800 pounds. In some cases, the weight capacity may be higher if the driver sits in the front compared to the back.
Change The Rear Axles
The next step in changing the rear shocks on a golf cart is to remove the rear axles and replace them with new ones of the same size. Make sure you remove the wheel chocks before you begin. This will prevent any accidents due to falling off the carts and hurtling down the road. When replacing the rear axles, it is important to get the same size as the originals to ensure that everything lines up correctly. If you don’t have the original parts lying around, you can refer to the diagram below for the correct ratios of front to rear gears.
Just as with changing the front tires and/or rims on a car, changing the rear shocks on a golf cart is a task that can be completed with a bit of preparation and planning. Make sure you’ve removed all harmful materials from the area where you will be working and take the time to break it all down before you start. With careful planning and execution, you’ll be able to change the rear shocks on a golf cart and enjoy a new set of tires in no time at all. If you find this article useful, you may also want to check out our guide on How to Change the Suspension on a Car, as it contains useful information relevant to this task as well.