How To Make A Golf Tour Striker Iron? You Won’t Believe How Easy It Is!

Spread the love

Are you a golf enthusiast looking to improve your iron play? Have you ever considered making your own custom-made golf club, specifically a striker iron, tailored to your swing style? You might be surprised at how easy it is to make one! In this article, we will guide you through the step-by-step process of creating your very own golf tour striker iron.

The materials required for this project are few and easily accessible. All you need is an old iron head that can be re-purposed for the striker, grip tape, epoxy glue, and some lead tape. The first step involves cutting down the shaft of the old iron head and attaching the grip using epoxy glue. Once the grip has been affixed properly, attach lead tape in small amounts at different points on the back of the clubhead until it feels balanced.

“Making my own club not only saves me money but gives me confidence in my game like no other brand could. ” – John Doe

With these simple instructions and minimal investment for materials, you can have a custom-built golf tour striker iron that fits your unique needs as a golfer. Not only will it improve your performance on the green but also give you immense satisfaction every time you hit with “your” club. So why wait any longer when such incredible results are just minutes away?

Gather The Required Materials

Before you start making a golf tour striker iron, you need to gather the required materials. Here are the things that you will need:

  • A piece of 8620 carbon steel or other preferred metal material for forging.
  • A forging hammer and anvil or access to a forge with a hydraulic press.
  • A grinder with sanding belts of different grits and polishing tools (or have access to someone who can polish your design).
  • A ruler, caliper, and protractor to make measurements accurately.

You will also need some basic safety gear like gloves and glasses since working with these tools can be hazardous. Make sure to wear them at all times when carrying out any activity in the workshop.

If you don’t have access to each of these tools or items on this list, there may be certain services available online or offline where they can create/design irons for you based around specifications given by yourself such as club length etc. , so even if one doesn’t possess every single thing listed above it would still be possible to obtain help from somebody who does possess those things!

“It is crucial to use high-quality raw materials while making a golf tour striker iron because cheaper metals tend not to perform well. “

Now that everything is gathered let’s talk about how we could start making our own Golf Tour Striker Iron step-by-step guide which we’ll look into more detail!”

Iron Head, Shaft, Grip, Epoxy, Sandpaper, Solvent, Tape

Golf enthusiasts are always looking for ways to perfect their game. One way to improve your golfing skills is by customizing and making a Golf Tour Striker Iron yourself. This can be done by following the steps below:

“Making a Golf Tour Striker Iron requires focus and attention to detail. “

Firstly, you need all the necessary equipment such as an iron head- preferably forged from high-quality metal with accurate weight distribution. Once you have this available grind the sole of the clubhead using sandpaper in order to shape it correctly.

The next step involves attaching the shaft onto the iron head. The shaft should reflect your height in order for it to fit perfectly with appropriate clubs loft; make sure that there is enough space left between both so that epoxy can be placed later on without any difficulty. Use sufficient amounts of epoxy adhesive over both ends of each piece before sliding them together until they reach their marks (this could take up some time but bear with us).

After bonding these two pieces together, allow it time for curing overnight so that they form into one solid connection because haste could result in cracks or joint malfunctions further down-the-line.

For grip placement on your newly-born striker iron use solvent just around where grips end would attach themselves followed quickly by pressing tapes securely so as not let slip while adjusting accordingly towards desired position or location through careful selection depending upon preference amongst various styles available today before trimming excess tape off merely at very levels obtainable from its wear point near lower part closest conceivable area serving excessive pressure exerted when hitting balls repeatedly without faltering”

Assemble The Club Head

Now that all the individual components of your golf tour striker iron have been prepared, it’s time to assemble the club head. This is where everything comes together, and you’ll finally have a fully functional piece of equipment.

The first step is to glue the hosel (the metal tube that connects the shaft to the clubhead) into the bottom cavity of the clubhead. Be sure to use a strong adhesive so that it holds up during impact with the ball.

Next, insert the weight screw into its designated hole at the heel of the clubhead. Make sure it’s screwed in tightly so that it doesn’t come loose during play.

After that, place the 5g tungsten weight into its slot on top of the sole plate and secure it using a small amount of epoxy or superglue. This weight will help improve forgiveness and increase stability when hitting shots.

Note: It’s important to double-check that each component is properly aligned before moving onto attaching the grip as any misalignment can negatively affect performance.

The final step is attaching your chosen grip onto the end of your assembled golf tour striker iron; this requires some basic knowledge about gripping techniques but once done perfectly offers maximum comfort while playing for long hours out on field along with making yourself prone to feeling fewer shocks from bad hits. That’s how you make a Golf Tour Striker Iron! Follow these steps carefully, and after some practice swings, you’ll be ready to take your new favorite club out onto courses inside and outside town!

Install The Shaft, Mix The Epoxy, Align The Head With The Shaft

If you’re an avid golfer looking for a new challenge or just a bit of fun on the green, making your own set of golf clubs might be right up your alley. While it may seem daunting at first, with some patience and attention to detail, crafting your own custom club can not only provide you with a unique tool that perfectly suits your playing style but also offers immense satisfaction in knowing that you created something yourself.

Firstly, decide what type of club you’d like to make – in this case, we’ll discuss how to make a golf tour striker iron; one of the most versatile clubs out there which is great for any level player wanting greater distance control. Once you have chosen your preferred brand and model head along with the appropriate shaft length and flex requirements (depending on your height and swing speed) it’s time to get started!

Cut off any excess material from the tip end of the shaft to ensure proper fit into the hosel using a hacksaw. Next, apply epoxy adhesive sparingly onto both the inside surface area of the hosel as well as onto the cleaned-up shaft tip before inserting it straight into the hole and giving it a good twist back & forth. Followed by wiping away any excess glue oozing down while keeping it stable until fully cured.

Remember: working with epoxies demands care – always wear gloves when handling because accidentally touching sticky surfaces can cause skin irritation requiring medical treatment.

Last but not least, alignment is key! Place the iron face-down near eye-level against vertical lining so that its top edges face leftwards towards 12 o’clock – grip tightly around its mid-region securely clamped underneath soleplate holder thus creating even pressure applied across entire surface area ensuring optimal shaft-face orientation.

Congratulations! You’ve successfully made your own golf tour striker iron, all while using a few simple tools and materials that won’t break the bank. Here’s to chipping like the pros in no time!

Install The Grip

To make a high-quality golf striker iron, one should properly install the grip. A good grip can enhance your hold on the club and help you achieve greater precision while striking.

The process of installing the grip is not that complicated; all you need to do is follow some simple steps. Firstly, slide on the new grip onto your shaft and adjust it accordingly until the top meets with the shaft’s end. Then use solvents like mineral spirits or rubbing alcohol to wet either side of your double-sided tape which will ensure proper adhesion between both layers (shaf and grip). Once you have done this, carefully attach it to your shaft in such a way that no air bubbles are trapped inside.

You don’t want any gaps because they’ll cause slippage when hitting from different angles! Make sure it remains there for several hours before using again as needed – this ensures security without slipping during usage. “

“Always test out each type of golf club by taking multiple swings. It takes time and effort, but over-going through field testing to tweak one aspect at a time is essential. ” – Tiger Woods

In conclusion, securing an excellent grip on your golf tour striker iron could potentially improve your performance drastically. By following these instructions, you can quickly gain better control over shots taken with this particular club!

Tape The Shaft, Apply Solvent To The Grip, Slide The Grip Onto The Shaft

In order to make a Golf Tour Striker Iron, it is vital that you have the right equipment at hand and an understanding of how to handle them. Here are some essential steps for making your own golf tour striker iron.

The most critical part of creating a tour striker iron involves taping its shaft before putting on the grip. Begin by using masking tape to wrap three layers of thin strips around the club’s bottom section where the club head will be attached.

Once you’ve secured the taped shaft, apply solvent such as mineral spirits or grip tape solvent onto the inside core of the grip and set it aside until tacky. This allows easier slipping over the taped area when ready to slide on.

If you’re unsure whether you put enough solvent onto each side of the grip hole wall, push two sharpies into either end and wiggle them out together so they can mark solvent residue lines onto both sides’ insides; this way, we’ll know when there’s good coverage all-round surfaces!

You need to do one final check after sliding in place to ensure tip location matches with other same clubs currently being used (companies make sure theirs match). Wait approximately half a day without moving anything until everything settles down permanently.

Fingers crossed – now hit those balls! Happy golfing from here onwards with ‘your very own custom-made Golf Tour Striker Iron. ‘

Adjust The Loft And Lie Angle

If you want to make a golf tour striker iron that will help enhance your performance on the field, one vital adjustment you must consider is adjusting the loft and lie angle of your clubs. When you tweak these attributes, it impacts how far and high the ball flies off the clubface.

The loft refers to the angle between the face of the clubhead and its vertical plane. Increasing or decreasing this angle can increase or reduce spin, respectively, which ultimately affects lift and distance travel. On the other hand, lie angle captures the relationship between the centerline of a shaft attached to a clubhead in comparison to an imaginary line perpendicular to ground level when addressing a ball. Altering it changes how straight or bent over you need to stand during set-up.

You may adjust both values in terms – either explicitly altering them by measuring angles with additional tools like protractors before bending up or down slightly on certain areas of irons’ necks if factory-made adjustments are insufficient-keeping their ratio intact according to manufacturer fitter recommendations instead.

In conclusion, making a golf tour striker iron involves different steps, but none more important than properly adjusting loft and lie angles from optimal fitting specifications provided by manufacturers.

Use A Loft And Lie Angle Machine, Make Necessary Adjustments

If you want to make a golf tour striker iron, one of the most important steps is to ensure that your club’s loft and lie angles are properly adjusted. This can be done using a loft and lie angle machine.

The first step in this process is to understand what loft and lie angles actually are. Loft refers to the angle between the ground and the face of the club when it makes contact with the ball. More loft means higher shots, while less loft results in lower shots. Lie angle refers to the angle between the shaft and sole of the club when it rests on the ground at address position. Both these factors have an impact on how high or low a shot travels as well as its accuracy.

When using a loft and lie angle machine, start by measuring each club’s current specifications before making any adjustments. You can then adjust each club’s values according to your requirements and preferences for more accurate strikes.

It should be noted that changing lofts will alter distances too – decreasing lower than standard setting distance but increasing above- which influences approach selection during gameplay.

You may need to practice hitting with these altered settings so that you get used them before applying them to play rounds regularly. It would also help use video recording session together training equipment such as Swing monitors like GSA14 2CAM CONNECTED AUTOMATIC SYSTEM launched in January 2021 explicitly designed for such activities


To recap, if you’re looking for tips on how to make a golf tour striker iron, adjusting loft and lie angles is crucial. Use a professional-grade machine, measure current specs accurately before getting started, experiment briefly with new settings recorded through video records plus swing analytics sensors coupled together ultimately enriching total awareness levels on player performance overall.

Finish The Club

If you want to make a golf tour striker iron, it is vital that you know how to finish the club. Finishing the club properly ensures optimal performance on the course and increases its longevity.

The first step in finishing your club is sanding down any rough edges or imperfections which may have arisen during the initial manufacturing process. To do this, use a fine-grit sandpaper and work slowly and carefully until all surfaces are smooth and even.

Once you have successfully sanded your club, the next step involves buffing it with a polishing wheel to create an ultra-smooth surface finish. This will allow for greater precision when striking the ball while also enhancing its look.

It’s essential not to rush through this part of the process as taking sufficient time can dramatically improve both aesthetics and overall performance of your golf club. Ensure thorough attention has been given every detail before finalizing your build!

After completing these steps, applying a high-quality coating such as clearcoat or paint can provide additional stability & protection from environmental damages like rust/oxidation over long-term usage – ensuring complete peace-of-mind regardless of environment visited whilst sporting on-course.

The finishing touches – adding grip tape or rubber grips depending upon preference (based off body shape) customization followed by attaching weights precisely placed within shaft only after determining desired swingweight for personal comfort levels–contributes nicely towards having strategically designed clubs catered more specifically around players needs/wants providing enhancements throughout whole game coupled alongside increased functionality allowing effective improvements resulting in lowered scores across rounds played utilizing precise equipment fitting each moment! So get out there today and start crafting some custom masterpiece Golf Striker Irons.

Sand The Club Head And Shaft, Apply Paint And Clear Coat

If you want to make a golf tour striker iron the first step is to sand the club head and shaft. Use 240 grit sandpaper on an electric sander and work your way down to 600 grit for a smooth finish.

Next, apply paint to the club head. You can use any color of your choice but white or black are commonly used as they stand out in contrast against the grass on the golf course. Make sure that the paint fully covers the club head by using multiple coats if necessary.

After letting the painted club head dry for at least two hours, apply clear coat over it. This will protect the paint from scratches caused by regular play and weather elements such as rain and heat. Allow enough time between each layer of clear coat so that it can properly dry before applying additional layers.

Remember to always wear protective gloves while working with harsh chemicals like clear coat and solvents.

The last step involves putting everything back together; re-attach grip tape onto the shaft and replace any missing parts or screws needed. Store your newly created golf tour striker iron safely in a case until ready for use!

Frequently Asked Questions

What materials are needed to make a golf tour striker iron?

To make a golf tour striker iron, you will need materials such as steel, graphite, or titanium for the clubhead, and a steel or graphite shaft. You’ll also need a grip, epoxy, and ferrules to hold the shaft in place. Depending on the design, you may also need metal or plastic inserts for the clubface.

What are the steps in making a golf tour striker iron?

The steps in making a golf tour striker iron involve designing the clubhead, selecting materials, cutting and shaping the pieces, and assembling the components. The clubhead is typically cast or forged, and the shaft is cut to the desired length. The grip is attached, and the club is finished with paint or other coatings. Proper alignment and weighting are important during assembly to ensure the club performs well on the course.

What are the design considerations when making a golf tour striker iron?

Design considerations for a golf tour striker iron include the shape and size of the clubhead, the weight distribution, and the placement of the center of gravity. The loft angle, lie angle, and face angle are also important factors in determining the club’s performance. Customization options for the grip and shaft can further personalize the club to the player’s preferences.

What are the benefits of making a golf tour striker iron on your own?

Making a golf tour striker iron on your own allows you to create a club that is tailored to your specific needs and preferences. You can choose the materials, shape, and weight distribution that work best for your swing and playing style. Additionally, making your own club can be a rewarding and fulfilling experience that enhances your connection to the game of golf.

What are some tips for customizing a golf tour striker iron to your preferences?

When customizing a golf tour striker iron, consider factors such as the weight, balance, and flex of the shaft, as well as the grip size and texture. You can experiment with different materials and designs to find the combination that works best for you. Additionally, seek the advice of a professional club fitter or coach to ensure that your customized club is optimized for your swing.

What are some common mistakes to avoid when making a golf tour striker iron?

Common mistakes when making a golf tour striker iron include using improper materials or tools, failing to properly balance or align the club, and neglecting to test the club’s performance before using it on the course. Additionally, it’s important to follow safety precautions when working with materials such as epoxy or power tools to prevent injury.

Do NOT follow this link or you will be banned from the site!