You have a new set of golf clubs and want to know what the best way to treat them is. There are many ways to go about it, but if you want the best overall experience, you should get the professional. They will take care of everything from the cleaning and conditioning of the clubs, to the fitting of the clubs to your personal preferences. Re-gluing a golf club head is a fun project to do yourself, but only if you know what you’re doing. This article will walk you through the steps of re-gluing a golf club head, step by step. It will cover everything from preparation to tools, so you can glue your club head the right way and not end up with a golf ball in your face every time you swing.
Table of Contents
Preparation
The first thing you’ll want to do is prepare the area where you’re going to glue the head. You should do this several days in advance so that you have time to lay down a strong base coat, which will make your adhesive job last longer. It’s also a good idea to prime the surface, whether it’s a wood or granite golf club head, by sanding down any high spots and rough edges. This will help the adhesive job and the finished product look more like new.
Masking
When you re-gluing a golf club head, you’ll need to mask off the area around the opening where you’re going to put in the adhesive. This is important because if you don’t mask off the area thoroughly, you could end up with some unwanted glue oozing through when you’re applying the adhesive. You should also know that there are different degrees of tackiness when it comes to adhesives, so make sure that the one you’re using is on the softer side. A waterproof adhesive is also helpful in preventing any damage from moisture or water, so make sure that you have one of those as well.
Tools
You need the right tools to do this project successfully. There are numerous cases where people used the wrong tool and had to start over. Make sure that you have all of the proper equipment before you begin. If you don’t have a spray paint can, you can use a brush and paint to mask off the area around the opening. Take your time, and don’t rush the process.
Cleaning
When you’re done glueing your golf club head, you’ll need to clean it thoroughly. This is important for preventing any unwanted residue from building up over time, as well as maintaining the original look of your finished product. The most common way of doing this is by thoroughly wiping down the surface with a clean cloth. If you’re using a wood or stone golf club head, you can use a few drops of oil or furniture polish on a dry cloth to make it look like new. Never use water to clean off your glue, as this could potentially dissolve the glue and ruin your product.
Fitting
When you’re done preparing your golf club head, you’ll need to make sure that the clubs are the right size for you. For most people, this means taking a trip to the golf shop and having the attendant measure you and your golf clubs. They will then use this data to suggest the right set of clubs for you. If you have a specific set in mind, you can contact the shop and have them look up your measurements. This is an important step because if you’ve been using the wrong set of clubs all this time, you could potentially damage your body when golfing. Especially if you’re using a set that’s too large or small for you, it could lead to injuries. For instance, if you have long arms and the person at the shop suggests that you should be using a set of intermediate clubs, your arms could get burned by the excessive heat as you swing the golf club.
Final Steps
Once you’ve prepared the area and the tools are in hand, it’s time to start applying the glue. Begin by spraying the area with a fast-drying clear coat, and then roll on a thick layer of transparent tape to protect the adhesive from water and prevent any peeling. Once the tape is in place, you can start applying the adhesive with a brush, taking care not to spread it too thin, otherwise you’ll risk having weak spots from which to peel off strips of tape. Once the adhesive is applied and smoothed out, it’s time to let it dry for 15 minutes before continuing with the next step.
Polymer Glue
If you’re re-gluing a wood golf club head, you can use any type of polymer glue. This type of glue is a bit more flexible than epoxy, which means it can adapt to larger changes in shape. It also has a higher shear strength, which allows it to hold up better to repeated impacts as well as heavy use. This type of adhesive is easy to work with and cheap, which is why it’s the preferred option for crafty individuals who want to DIY their club heads.
Epoxy Glue
If you’re re-gluing a granite golf club head, you can use epoxy glue. It’s one of the most popular adhesives within the industry because it’s easy to work with and provides a strong, durable bond. It also has a high tensile strength, which is what you need if you want to prevent your club head from coming off during impact. This is due to the fact that it is a two-part adhesive and requires a waiting period before fully curing. The disadvantage is that it is more expensive than the other two glues mentioned here.
Solvent Based Glue
If you’re re-gluing a steel golf club head, you can use solvent based adhesive. This type of adhesive is extremely thin and quick-drying, which makes it ideal for adhering two metal surfaces together. This allows you to cut down on the amount of time it takes to attach the head to the shaft, as well as provide a more precise fit between the two pieces. Most people use this type of adhesive to repair gunk and scratches on the surface of their metal items, so if your gunk or scratches are on the surface, you could use this type of adhesive to restore the original look of your piece.
Choosing The Right Adhesive For Re-Gluing
Now that you know what type of glue you’ll be using to re-glue your golf club head, it’s time to choose the right one. If you want to completely remove the residue from your previous adhesive job, use denatured alcohol or acetone. If you’d just like to restore the original look of your piece, use nail polish remover to get rid of any residue. Make sure that you don’t use any type of oil on this surface, as it will ruin the look of your product.