If you own a VW Golf, you know that the car is equipped with a rear wiper that can be a lifesaver in rainy or snowy weather. However, if you’re new to the car or simply haven’t had the need to use the rear wiper yet, you may be wondering how to turn it on. In this step-by-step guide, we will walk you through the process of turning on the rear wiper on your VW Golf, as well as adjusting the wiper speed and troubleshooting common issues.
Whether you’re driving through a downpour or need to clear some snow from your rear window, learning how to turn on the rear wiper on your VW Golf is a crucial skill that every driver should have. With our easy-to-follow guide, you’ll be able to activate the rear wiper in no time, ensuring that you always have a clear view of the road behind you.
So, if you’re ready to learn how to use this essential feature on your VW Golf, read on for our step-by-step guide!
Table of Contents
Locate the Wiper Control
Before you can turn on the rear wiper on your VW Golf, you need to locate the wiper control. In most models, the wiper control is located on the right-hand side of the steering wheel, on the same lever as the turn signal.
Some newer VW Golf models have an updated interior, which includes a touch screen that controls the wiper settings. If your model has this feature, you can access the rear wiper control by selecting the wiper icon on the touch screen and then selecting the “rear” option.
If you’re having trouble finding the wiper control, refer to your VW Golf’s owner’s manual for a detailed diagram of the interior and the location of the wiper control.
Once you’ve located the wiper control, you can move on to turning on the rear wiper and adjusting the settings to your desired level.
Locate the Wiper Control
Identify the Wiper Control Lever
Before you can turn on the rear wiper of your VW Golf, you must locate the wiper control lever. The lever is usually located on the right side of the steering wheel, on the same stalk as the turn signal control. Look for a lever with a symbol that looks like a windshield with wavy lines.
Once you have identified the wiper control lever, make sure the ignition is on and the wipers are in the off position. You should also check to ensure that the rear wiper blade is in good condition and not damaged or torn.
It is essential to identify the wiper control lever correctly as it controls not only the rear wiper but also the front wipers. Make sure you are adjusting the correct lever to avoid confusion and potential accidents.
If you are having trouble locating the wiper control lever, consult your VW Golf owner’s manual for further assistance.
Turn on the Rear Wiper
Now that you have located the wiper control, it’s time to turn on the rear wiper. This is a simple process that can be done in just a few steps.
Step 1: Make sure the car is on and the front wipers are not in use.
Step 2: Pull the wiper control lever towards you to activate the rear wiper.
Step 3: Adjust the speed of the wiper as needed using the control lever.
It’s important to note that the rear wiper will automatically turn off when the front wipers are turned off. If you need to use the rear wiper again, simply repeat these steps.
Flip the Wiper Control Lever to the Correct Position
Once you have located the wiper control lever, the next step is to flip it to the correct position to turn on the rear wiper. Look for the symbol that resembles a windshield with a wiper blade on it. This symbol is usually located on the lever itself or on the dashboard near the lever.
Depending on the year and model of your VW Golf, the position of the wiper control lever may differ. Some models require you to push the lever away from you to turn on the rear wiper, while others require you to pull the lever towards you. Make sure to consult your owner’s manual for specific instructions.
Once you have identified the correct position for your VW Golf, flip the wiper control lever to that position. You should hear a distinct click, which indicates that the rear wiper has been activated. You can now adjust the wiper speed and use the rear wiper spray function if needed.
Adjust the Wiper Speed
Once you have turned on the rear wiper, you may want to adjust the speed to match the intensity of the rain. To do this, you will need to locate the wiper speed control.
Locate the Wiper Speed Control – The wiper speed control is usually located on the same lever as the wiper control. It may be a separate button or a knob that can be rotated to adjust the speed.
Rotate the Knob – If your VW Golf has a knob for the wiper speed control, you can simply rotate it to adjust the speed. The knob may have different speed settings marked on it or it may have a continuous range of speeds.
Press the Button – If your VW Golf has a button for the wiper speed control, you will need to press it multiple times to cycle through the different speed settings. Each press will increase the speed by one level, and the cycle will repeat once you reach the highest speed setting.
Observe the Speed Change – As you adjust the wiper speed, you should be able to see the rear wiper move faster or slower. Make sure to adjust the speed as needed to maintain clear visibility through the rear window.
Select the Right Wiper Speed Option
Once you turn on the rear wiper, you may need to adjust the speed of the wiper blade to match the intensity of the rain. Some VW Golf models have up to five different wiper speed options.
Look for the wiper speed control on the wiper control lever, which may be labeled with numbers or symbols indicating the different speeds.
Move the lever up or down to choose the desired wiper speed. The different speed options may include intermittent, low, high, and super-high speed settings.
Remember to adjust the wiper speed as needed while driving to ensure optimal visibility and safety on the road.
Use the Intermittent Wiper Function
If you want to have the rear wiper wipe intermittently, you can use this function. The intermittent function allows the wiper to wipe at regular intervals, rather than continuously.
To use the intermittent wiper function, locate the wiper control and adjust the lever to the intermittent wiper option. You can adjust the interval between each wipe using the control.
The intermittent wiper function is especially useful when there is light rain or mist, as it will help keep your windshield clear without using too much of the wiper fluid. It can also help reduce wear and tear on the wiper blades.
Adjust the Rear Wiper Speed Manually
If you prefer to adjust the rear wiper speed manually, you can do so by selecting the appropriate speed setting on the wiper control lever. Look for the speed setting that indicates “rear wiper” or “rear wiper speed.”
You may need to experiment with different speed settings to find the one that works best for your driving conditions. For example, you may want to use a faster speed setting in heavy rain or snow, but a slower speed setting in lighter precipitation.
If you’re driving at highway speeds, you may want to select a higher speed setting to ensure that the wiper blade clears the rear window quickly and effectively. However, if you’re driving in stop-and-go traffic, you may want to select a lower speed setting to avoid wearing out the wiper blade prematurely.
Remember to always adjust the rear wiper speed safely while driving, and to only make adjustments when it is safe to do so.
Use the Rear Wiper Spray Function
If your car is equipped with a rear wiper spray function, you can easily clean your rear windshield while driving. Here are some steps to follow:
Step 1: Locate the rear wiper spray button on the wiper control lever.
Step 2: Make sure that the rear wiper is turned on before using the spray function.
Step 3: Press and hold the spray button for a few seconds until the fluid sprays onto the windshield.
Step 4: Release the button and use the rear wiper to wipe away the fluid and any debris on the windshield.
Using the rear wiper spray function can be a helpful way to maintain visibility while driving in wet or snowy conditions. Remember to always use it responsibly and with caution.
Find the Rear Wiper Spray Button
Locating the rear wiper spray button is an easy task. It is usually located on the wiper control lever, close to the base of the lever. Look for a button with an icon of a windshield with wiper blades and a spray of liquid coming out from it.
If you cannot locate the button on the wiper control lever, check the dashboard. Some cars have the rear wiper spray button on the dashboard, close to the steering wheel.
Refer to your car’s user manual if you still cannot find the button. The user manual will provide you with a detailed description of where to find the button, along with images to help you locate it.
Press the Spray Button to Activate the Rear Wiper Spray Function
Once you have located the rear wiper spray button, press it to activate the function. This will cause a stream of fluid to spray onto the rear windshield, helping to clear away dirt and grime. It is important to use this function when necessary to ensure optimal visibility while driving.
When using the rear wiper spray function, make sure to keep a sufficient amount of wiper fluid in the reservoir. Refill the reservoir with the appropriate fluid if it is running low. Failure to keep the reservoir filled may cause the spray function to stop working properly.
If the rear wiper spray function does not work when you press the button, check the connections to make sure they are secure. If the connections are secure and the function still does not work, it may be a sign of a more serious issue, and you should take your vehicle to a professional mechanic for further inspection and repair.
Adjust the Rear Wiper Spray Nozzle
The rear wiper spray nozzle is responsible for directing the spray of washer fluid onto the rear window. Sometimes, the nozzle might become misaligned or clogged, and the spray pattern might not be optimal. To adjust the nozzle, follow these steps:
- Locate the rear wiper spray nozzle. It is usually located near the rear wiper arm or at the base of the rear window.
- Use a pin or needle to clear any debris or buildup from the nozzle. Sometimes, debris can clog the nozzle and prevent it from spraying properly.
- Adjust the nozzle’s direction if needed. Use a small screwdriver or pliers to adjust the nozzle’s direction. The goal is to direct the spray towards the center of the rear window.
- Test the spray. Activate the rear wiper spray function and observe the spray pattern. Adjust the nozzle as needed until you achieve the desired spray pattern.
By following these steps, you can ensure that the rear wiper spray nozzle is properly aligned and adjusted, providing you with optimal visibility when driving in rainy or snowy conditions.
Troubleshoot Common Rear Wiper Issues
If you’re experiencing issues with your rear wiper, don’t panic! Many common issues can be easily fixed. One possible issue is a blown fuse. Check your owner’s manual to locate the fuse box and check the rear wiper fuse. If it’s blown, replace it and see if that fixes the problem.
Another common issue is a clogged wiper nozzle. This can happen if dirt or debris gets stuck in the nozzle. To fix this, use a pin or needle to clear the blockage, or try using compressed air to blow out any debris.
If your rear wiper is making unusual noises, it could be due to a worn out wiper blade. Inspect the blade and replace it if it appears worn or damaged. Another possible cause of noise is a loose or damaged wiper arm. Check the arm and tighten any loose bolts or replace it if necessary.
Sometimes the issue with your rear wiper may be due to a faulty motor. If you’ve checked the fuse and wiper blade, and the wiper still isn’t working, it may be time to replace the motor. Consult a professional mechanic to diagnose and fix the problem.
If you live in an area with extreme temperatures, it’s possible that ice or snow could be preventing your rear wiper from working. Make sure to clear any buildup of ice or snow on the wiper and surrounding area to prevent damage to the wiper and motor.
Check the Rear Wiper Fuse
If your rear wiper is not functioning, the first thing to check is the fuse. The fuse protects the motor and electrical system from damage due to power surges. You can check the fuse by looking in the owner’s manual to find the location of the fuse box. Once you have located the fuse box, use the diagram on the cover to find the rear wiper fuse. If the fuse is blown, replace it with a new one of the same amperage rating. If the new fuse blows as well, there may be a short circuit in the wiring that requires professional attention.
It’s important to note that a blown fuse is not always the cause of a malfunctioning rear wiper. Other issues such as a faulty motor or switch, damaged wiring, or a clogged washer nozzle could be the culprit.
If the rear wiper fuse is not the issue, move on to checking other possible causes of the problem.
Inspect the Rear Wiper Blade
Regularly inspecting your rear wiper blade is important to ensure it functions correctly. If the blade is cracked or damaged, it can cause streaks and impair visibility. Here are some steps to inspect the rear wiper blade:
- Check the blade for any visible damage such as cracks or tears. If there is damage, the blade needs to be replaced.
- Wipe the blade with a clean cloth to remove any dirt or debris that might be hindering its performance.
- Inspect the blade’s contact surface to ensure it is not dirty or corroded, which can cause it to skip or jump while in use.
- Check the blade’s tension by gently pulling on it. It should be firm and not loose or wobbly.
Inspecting and replacing the rear wiper blade regularly will ensure your rear windshield remains clean and visible in all weather conditions. If you notice any issues with the blade’s performance, it is recommended to replace it as soon as possible to avoid any potential hazards.
Frequently Asked Questions
Where is the rear wiper switch located in a VW Golf?
The rear wiper switch in a VW Golf is typically located on the same lever as the front windshield wipers. It is a separate button on the end of the lever that controls the front windshield wipers, and is usually labeled with a symbol representing the rear wiper.
Why isn’t the rear wiper working on my VW Golf?
If the rear wiper is not working on your VW Golf, there could be a few potential issues. Check the rear wiper fuse, inspect the wiper blade for damage or wear, and make sure the wiper motor is functioning properly. If these do not solve the issue, it may be a more complex electrical problem that requires professional diagnosis.
Can I adjust the speed of the rear wiper on a VW Golf?
Yes, you can usually adjust the speed of the rear wiper on a VW Golf. Most models have a rear wiper speed control button on the wiper lever, which allows you to toggle between different speed settings. If you cannot find this button or it is not functioning properly, consult your vehicle’s owner manual for more information.
Is it possible to manually operate the rear wiper on a VW Golf?
Yes, you can usually manually operate the rear wiper on a VW Golf. Look for a small button or lever near the wiper lever that controls the front windshield wipers. This should allow you to activate the rear wiper manually, or adjust its speed manually if your vehicle has this feature.